The circuit breaker for your potable water system. Apollo Expansion PEX Manifold Systems allow for longer continuous runs of PEX-A pipe, meaning fewer fittings and spending less time on installation. Longer runs with fewer connections also mean fewer chances of leaks and water damage, smoother bends and turns, and reduction of line noise and water hammer. Manifold Systems are used so each branch line only feeds one fixture. The Manifold greatly reduces pressure fluctuations and temperature swings that can cause scalding. Apollo Expansion PEX Manifold Systems are available in a wide range of outlet ports and materials. Compatible with Uponor (Wirsbo) ProPEX™ piping systems. *ProPEX® is a trademark of Uponor. For use with PEX-A pipe only.

Apollo Expansion PEX Poly Alloy Manifolds are exclusively designed for use with PEX-a pipe. All of these manifolds have 3/4 in. barb inlets/outlets and 1/2 in. barb branches, unless otherwise noted. The manifolds offer a larger I.D. than traditional crimp fittings for full flow resulting in fast delivery of potable water. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. For use with PEX-a pipe only. Compatible with Uponor (Wirsbo) ProPEX™ piping systems.  *ProPEX® is a trademark of Uponor.

Model #Description
EPXMANI1212 Port Manifold System
EPXMANI1616 Port Manifold System
EPXMANI2020 Port Manifold System
EPXMANI2424 Port Manifold System
EPXMANI2828 Port Manifold System
EPXMANI 3232 Port Manifold System
EPXMANI3636 Port Manifold System
EPXM3PT3 Port Poly Alloy Manifold, Closed End
EPXM4PT4 Port Poly Alloy Manifold, Closed End
EPXM6PT6 Port Poly Alloy Manifold, Closed End
EPXM2PTO2 Port Poly Alloy Manifold, Open Ends
EPXM3PTO3 Port Poly Alloy Manifold, Open Ends
EPXM4PTO4 Port Poly Alloy Manifold, Open Ends
EPXM4PTO14 Port Poly Alloy Manifold, Open Ends
1 in. x 3/4 in. Inlet/Outlet x 1/2 in. Branches
EPXFF1212SDVManifold Ball Valve
1/2 in. PEX x 1/2 in. FNPT
EPXNPSM34Manifold Inlet Adapter
3/4 in. PEX x 1 in. NPSM

%d bloggers like this: